Technical specifications

Power supply: 230V AC ~ 50Hz
Consumption: <1W
Heater maximum power: 3680 W
Metering of Instant power (W) and cumulated Energy (Wh) – compatible home automation gateway needed
RF Protocol: Zigbee 3.0
Radio frequency range: 2.4Ghz
RF power max: +10dBm
Range: up to 40m indoor
Operational temperature:
The SIN withstands ambient temperatures :
• Between -20 and 40° in the open air.
• Between -20 and 35°C in a flush-mounted box.
• Between -20 and 40°C in the NodOn DRB (Din Rail Box).
• Between -20 and 40°C in the NodOn BPS
(Surface-Mounted Box).
Protection rating: IP 20

Installation

NodOn Zigbee Pilot Wire Heating Module allows to connect any type of pilot wire heater to a compatible Zigbee network. Thanks to its compact size, the Pilot Wire Heating Module can be installed behind the grommet of the pilot wire heater.

TIP
Add the Zigbee Pilot Wire Heating Module to the electric panel with NodOn DIN Rail Box.

Installation diagram

  1. Cut the power supply.
  2. Dismantle the grommet connecting your pilot wire heater
  3. Cable the module according to diagram figure 1.
    Make sure the pilot wire of your heater is well connected on the FP terminal before turning the power supply back ON.
  4. Reinstall the grommet.
  5. Turn the power supply back ON.

Adding to a zigbee network


When power is turned ON, the relay switch Led will blink orange, looking to join a Zigbee network. Go to your Zigbee gateway app to activate the relay switch detection..

If the relay switch has correctly joined the network, the Led becomes green. The relay switch is ready for use.

If the relay switch hasn’t joined a network within 15 minutes, the Led becomes orange. Do a brief press on the relay switch button and start again.

Technical Contact

Do you have a specific question or need help installing or using your product? Contact us by email at rf.nodon@troppus or on +33 7 68 04 20 90.