Technical specifications
Power source: photovoltaic cell, with 3 days autonomy
Autonomous operation: 200 Lumens
Mounting: using adhesive bounding (included) or screws (not included)
First use without battery can necessitate a brightness charge <10 minutes
Optional CR1216 battery (not included) for dark area use
Autonomy in total darkness: 3 years
Pairing button at the back of the sensor
Frequency: 868Mhz or 908MHz
Radio range – inside use:
Masonry: 30m
Reinforced concrete: 15m
Placoplatre or wood: 40m
Protection index: IP 20
EEP EnOcean Profile: D5-00-01
Dimensions: 80*26*18mm
Installation
The Door and window sensor magnet have to be in front of the sensor mark, at a maximum distance of 5mm.
To change the battery, open the door and window sensor hood. You can replace the CR1216 battery.
Pairing procedure
To pair the door and window sensor with an EnOcean compatible device, open its hood and press once on the pairing button.
Advanced features
Solar power source: 200 lumens for an autonomous use
- Reload of the battery from 200 lumens
- Expose the product at 400 lumens for 4 hours to reload it for 24h of autonomy in total darkness
- Maximum capacity: reload for 3 days of autonomy
Compatible smart home hub
FAQ
Q: My sensor isn’t in front of a window. Can it work?
A: Yes. The sensor stores the solar light, incandescent and fluorescent. If a light near the sensor stays ON for a certain time, then the sensor will use it to reload itself. If the sensor is in total darkness (in a chest for example), it is possible to add a battery for 3 years autonomy.
Technical support
You have a specific question or need help regarding the installation or use of your product? Contact us by email at rf.no1734844706don@t1734844706roppu1734844706s1734844706 or at +33 7 68 04 20 90.
