Transform your solar installation into an intelligent system

Producing and storing is great.
But managing your energy is even better.
Transform your solar installation into an intelligent system with our Zigbee solutions.

Discover the solar range See our energy meter

Measure, analyze, optimize: your solar panels become intelligent.

Q: How to monitor my solar production in real time?

With the NodOn Zigbee Smart Energy Meter , you can measure your solar production in real time. Install it on your electrical panel, connect it to your Zigbee home automation gateway (Home Assistant, SmartThings, Jeedom, Homey, etc.), and instantly visualize the production of your solar panels. You have access to: Instant power produced (in watts) Energy produced (in kWh) Production history Production curves to identify the best times

Q: How to optimize my solar installation?

Optimization relies on maximum self-consumption : consume your own solar energy rather than sending it back to the electrical grid (or buying it from the grid). With NodOn, optimize in 3 steps: Measure : install the Energy Meter to know your production and consumption in real time Automate : use the Multifunction and Pilot Wire Modules to automatically trigger your devices (water heater, heating, appliances) when your solar production is maximum Adjust : analyze your data and refine your automations to achieve an optimal self-consumption rate (> 70%)

Q: What equipment to choose to manage my consumption?

To get started: Zigbee Smart Energy Meter : essential for measurement (production + consumption) A Zigbee home automation gateway (Home Assistant, SmartThings, Jeedom, Homey, Eedomus, etc.) To go further: Multifunction Module with measurement : to manage water heater, EV charger, heavy electrical outlets Heating Pilot Wire Module : to synchronize your electric heating with solar production 💡 Our advice: Start with the meter to understand your energy flows, then add control modules to your biggest consumers.

Q: What is Zigbee and why use it?

Zigbee is a low-power wireless communication protocol, specially designed for home automation and IoT (Internet of Things). Why it's perfect for energy management: Reliability : self-healing mesh network (each device relays the signal) Low power consumption : modules consume very little energy No Wi-Fi saturation : uses a dedicated frequency band (2.4 GHz but different channel) Interoperable : global standard, compatible with all Zigbee gateways Excellent range : 10-100 meters depending on environment, extendable with mesh network Secure : AES 128-bit encryption 💡 Unlike Wi-Fi , Zigbee is designed to stay connected permanently without consuming resources. It is the reference technology for energy home automation.

Q: Which home automation gateway is recommended?

NodOn products are compatible with a very wide range of Zigbee home automation gateways . Here are some popular options: Home Assistant (with Zigbee dongle): very powerful open-source solution, ideal for advanced users Jeedom : complete and flexible French solution Homey Pro : very intuitive all-in-one gateway by LG Electronics SmartThings : simple, intuitive and powerful solution from Samsung Eedomus : simple and reliable French solution

With NodOn, your solar installation becomes a true energy dashboard:
Measure, automate, optimize. Clear, precise, and frankly satisfying to use.

Solar production monitoring

Visualize at every moment what your solar panels produce, in real time.

Precise consumption measurement

Identify exactly what consumes in your home and when.

Intelligent automation

Trigger your devices at the optimal moment of solar production.

Monitor your production and consumption in real time

No more estimates!

The Zigbee energy meter measures every watt produced and consumed, and displays it in real time on your home automation app.

Instant power produced by your solar panels
Household electricity consumption
Energy surplus or deficit at a glance

Maximize your self-consumption

The real power is automation. Thanks to NodOn modules, your devices are triggered automatically when your solar production is at its maximum.

Consume your own energy rather than sending it back to the grid.

Hot water heater activated during sunny hours
Heating synchronized with production
Household appliances managed intelligently

Reduce your bill

By intelligently managing your energy, you maximize your self-consumption and reduce your purchases from the electrical grid.

Result: visible savings on your bill and a better return on investment for your solar installation.

Less consumption from the electrical grid
Optimized self-consumption rate
Reduced electricity bill

Monitor your production and consumption in real time

No more estimates!

The Zigbee energy meter measures every watt produced and consumed, and displays it in real time on your home automation app.

Instant power produced by your solar panels
Household electricity consumption
Energy surplus or deficit at a glance

Maximize your self-consumption

The real power is automation. Thanks to NodOn modules, your devices are triggered automatically when your solar production is at its maximum.

Consume your own energy rather than sending it back to the grid.

Hot water heater activated during sunny hours
Heating synchronized with production
Household appliances managed intelligently

Reduce your bill

By intelligently managing your energy, you maximize your self-consumption and reduce your purchases from the electrical grid.

Result: visible savings on your bill and a better return on investment for your solar installation.

Less consumption from the electrical grid
Optimized self-consumption rate
Reduced electricity bill

Zigbee Smart Energy Monitor

Real-time measurement of your solar production

Instantly track the performance of your solar panels. Know how much you produce at every moment and adapt your consumption accordingly.

Precise measurement of household electricity consumption

Identify consumption peaks, detect energy-hungry appliances, and make the right decisions to optimize your solar installation.

Simple installation at the electrical panel

Can be installed directly at the electrical panel. Quick mounting, simple configuration via Zigbee. No complicated wiring.

Discover the energy meter

Your solar energy optimized and automated

A complete range of Zigbee solutions to monitor, automate and optimize all your energy. From measurement to control, NodOn accompanies you in your energy transition.

3CT Zigbee Energy Meter

€0,00

Zigbee Pilot Wire Heating Module

€0,00

Zigbee Multifunction Relay Switch with Metering

€0,00

Zigbee Smart Energy Monitor

€0,00

Concrete use cases to optimize your energy

Discover how NodOn transforms your daily energy use with intelligent automations.

Intelligent solar water heater

Problem: Your water heater heats at night during off-peak hours, but you produce free energy during the day.

NodOn Solution: The Multifunction Module activates your water heater as soon as your solar production exceeds a defined threshold. Free hot water guaranteed!

Heating synchronized with the sun

Problem: Your electric heating consumes a lot, even when you are producing solar energy.

NodOn Solution: The Pilot Wire Module sets your radiators to Comfort mode during solar production peaks, and to Eco the rest of the time. Thermal comfort + solar energy = winning combo.

Monitor energy activity instantly

Problem: You never know if it's the right moment to run an energy-hungry appliance.

NodOn Solution: Open your home automation app and see at a glance: current production, consumption, available surplus. Run your washing machine at the optimal time.

FAQ - Everything you need to know to optimize your solar installation

How to monitor my solar production in real time?

With the NodOn Zigbee Smart Energy Meter, you can measure your solar production in real time. Install it on your electrical panel, connect it to your Zigbee home automation gateway (Home Assistant, SmartThings, Jeedom, Homey, etc.), and instantly visualize the production of your solar panels.

You have access to:

Instant power produced (in watts)
Energy produced (in kWh)
Production history
Production curves to identify the best times

How to optimize my solar installation?

Optimization relies on maximum self-consumption: consume your own solar energy rather than sending it back to the electrical grid (or buying it from the grid).

With NodOn, optimize in 3 steps:

Measure: install the Energy Meter to know your production and consumption in real time
Automate: use the Multifunction and Pilot Wire Modules to automatically trigger your devices (water heater, heating, appliances) when your solar production is maximum
Adjust: analyze your data and refine your automations to achieve an optimal self-consumption rate (> 70%)

What equipment to choose to manage my consumption?

To get started:

Zigbee Smart Energy Meter: essential for measurement (production + consumption)
A Zigbee home automation gateway (Home Assistant, SmartThings, Jeedom, Homey, Eedomus, etc.)

To go further:

Multifunction Module with measurement: to manage water heater, EV charger, heavy electrical outlets
Heating Pilot Wire Module: to synchronize your electric heating with solar production

💡 Our advice: Start with the meter to understand your energy flows, then add control modules to your biggest consumers.

What is Zigbee and why use it?

Zigbee is a low-power wireless communication protocol, specially designed for home automation and IoT (Internet of Things).

Why it's perfect for energy management:

Reliability: self-healing mesh network (each device relays the signal)
Low power consumption: modules consume very little energy
No Wi-Fi saturation: uses a dedicated frequency band (2.4 GHz but different channel)
Interoperable: global standard, compatible with all Zigbee gateways
Excellent range: 10-100 meters depending on environment, extendable with mesh network
Secure: AES 128-bit encryption

💡 Unlike Wi-Fi, Zigbee is designed to stay connected permanently without consuming resources. It is the reference technology for energy home automation.

Which home automation gateway is recommended?

NodOn products are compatible with a very wide range of Zigbee home automation gateways. Here are some popular options:

Home Assistant (with Zigbee dongle): very powerful open-source solution, ideal for advanced users
Jeedom: complete and flexible French solution
Homey Pro: very intuitive all-in-one gateway by LG Electronics
SmartThings : simple, intuitive and powerful solution from Samsung
Eedomus: simple and reliable French solution

How much can I save with NodOn?

Savings depend on your solar installation, your consumption, and your automations, but here are some realistic estimates:

Without control: typical self-consumption rate 30-40%
With NodOn control: self-consumption rate 60-80%

Concrete example:

1.120 kWp installation producing 1,200 kWh/year:

Without control (35% self-consumed): 420 kWh self-consumed = ~€90 saved
With NodOn control (70% self-consumed): 840 kWh self-consumed = ~€180 saved
Additional gain: €90/year

For a larger installation (3 kWp): gain of €200-400/year.

Legal Notice | Privacy Policy | Terms of Sale